How to Install Bathroom Plumbing Rough in

by Zachary

If you’re planning on remodeling your bathroom or building a new home, it’s essential to install bathroom plumbing rough in before the walls are framed and the cabinets are installed. This will ensure you get the best placement for your fixtures and drain worldnewsite.

Aside from the obvious water lines and supply pipes, there are a variety of other elements involved. For instance, you’ll want to make sure there are at least two stub-outs for drains, as well as a couple of shut-off valves.

Ideally, you’ll be using a T-Connector, which allows wastewater to flow downhill into the main sewer. But you can also use a street elbow. You’ll just need to make sure you have a large pipe cutter handy for the job.

Other components you’ll need to get right include the drain and vent. The drain should be placed at least 6 inches above the flood level of the fixture, and it should slope at least 1/8 to 1/4 inch per news247 com.

As for the vent, you’ll need to attach a low-heel vent assembly, which can be secured with a pipe strap. It should be positioned as low as possible, but still in reach of the drain buxic.

Besides the obvious, you’ll need to mark and cut the holes for the pipes. Make sure to get the proper gauge for PEX pipe. Also, you’ll need a deburring tool and go/no-go gauge.

If you’re installing a pedestal sink, you’ll need to run a waste-water pipe under the sink. In addition, you’ll need to fit angle fittings to make it easier to hook up the sink P-trap.

Related Posts

Leave a Comment